Car preheater water pump TA50 -Under harsh environmental conditions such as low temperature of -45°C, the TA50 automotive water pump can still work normally, helping the car to start quickly in extreme environments.
Car preheater water pump TA50 is a Engine Auxiliary Water Pump, with an electronically controlled drive unit, which is a type of Starting engine heater pump .Car preheat circluation pump can improve the efficiency of car preheater, help the preheater start easily in extreme environments, reduce wear and tear
Preheater water pump of the automobile engine preheater draws out the coolant in the engine body, heats it through the automobile engine preheater, and then circulates it into the engine body, thereby heating the engine and achieving the purpose of starting the engine in low temperature conditions.
Automotive water pump TA50 are widely used in electric car engine heater,Engine Pre-heating,Engine Cold Start System ,Car Auxiliary Heaters, Parking Heaters
Resistant to extreme low temperature starting at -45°C and high temperature resistant to 100°C
Long working life >20,000 hours
IP67: High dust and waterproof rating
6-28V wide voltage operation
Protection functions:
Blocked-Protection,Polarity Protection,Over Temperature Protection
Thermo systems
Heating System (Car Auxiliary Heaters, Parking Heaters)
HVAC Circulation Systerm
Engine Auxiliary
Engine Cold Start System
EV Charging Cables,E-Car Charging pile
Automotive Cooling System
The data in the table is the measured performance when pure water is delivered at normal temperature.
The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min.
Rated power means the power at the optimum efficiency point.
Noise≤42dB(A), the noise is measured from 1m in front of the pump.
Working mode: Continuous
IP level: IP67
Applied liquid: pure water, antifreeze solution
Coil Insulation class: Class H
Ambient temperature: -45°C ~85 °C
Liquid temperature: -45 °C (non-frozen)~125 °C
Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction
environment.
1. /FG (RPM) signal wire
Cumulatively provide customized services for 100+ well-known brands around the world
Provide customers with professional customized solutions
For other customization, please contact us !
Recommend you also directly send and email to info@topsflo.com to get our fastest response.
Recommend you also directly send and email to info@topsflo.com to get our fastest response.