Food Grade Pumps B10 is a 24V dc water pump that is made of food-grade materials, and the overall mini water pump also reaches FDA WRAS certification.customizable It is used for water dispenser,ice maker,soup maker,slow cooker, etc.
• Resistant to 100°C high temperature
Imported raw material, high-temp endurance, no leakage, more reliable
• Food-grade
Global selection of high quality raw materials, all wetted parts approved by FDA, WRAS
• >20,000 hours long working life
Adopting high efficiency brushless motor, low power, low temperature rise, long working life
• 35dB(A), super quiet
Suspended rotor design, with the same performance, noise is 5-10dB(A) lower
Hot water dispenser
Hot drinking water systems
Vending Machine, Beverage dispenser
Under counter drinking water dispenser
Instant filtered boiling
Small booster system
Cooling circulation system
The data in the table is the measured performance when pure water is delivered at normal temperature.
The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min.
Rated power means the power at the optimum efficiency point.
Working mode: Continuous
IP level: IP68
Noise≤35dB(A)
Coil Insulation class: Class F
Ambient temperature: -40°C ~40 °C
Liquid temperature: -40 °C (non-frozen)~105°C (31W pump 75 °C only)
Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment.
Recommend you also directly send and email to info@topsflo.com to get our fastest response.
Recommend you also directly send and email to info@topsflo.com to get our fastest response.